Articles:

– Sweep the carpet by moving in one direction each time..

Frequently Asked Questions.How Can I Clear Blockages From The Mini Motorised Pet Tool?.

How to Clean Shark Vacuum Filters

The process for removing blockages from the Mini Motorised tool is similar to the Motorbar cleaner head.Use a coin to remove the end cap, then slide the mini brush bar out of the tool.You can then clear obstructions (such as hair) and wipe the bar with a damp, lint-free cloth.

How to Clean Shark Vacuum Filters

The brush bar in this tool is not washable though, so don’t run it under a tap.. How Can I Clean The Soft Roller Brush Bars?.Unlike the Motorbar and Mini Motorised tool, the Soft Roller.

How to Clean Shark Vacuum Filters

have washable brush bars.

These need to be removed from the vacuum and run under a cold tap.While rinsing, gently squeeze the foam from the inside to remove more dirt..

With the foam element facing upwards, fill with water and put your hand over the top.Then gently shake the filter to agitate dirt and other debris, before pouring away the water.

Repeat the process until the water runs clear..Tap off excess water and allow the filter to dry for at least 24 hours.